Filter
Top Products
REPLACEMENT AND CLEANING OF PHOTOMETRIC COMPONENTS
17 - 6
ETC00303(1) BINOS E e (2.0) 02/2007
Rosemount Analytical
17.4 Reinstalling of the Photometer Assembly
Insert the photometer assembly into the analyzer housing and fasten in position using
the hexagonal screws shown in Fig. 17-1.
Reconnect all gas lines to the assembly.
Reconnect all electrical connections between the photometer assembly and the
electronic unit pcb PIC or DSP (see Section 1.3.2).
Perform a leakage test (see Section 14).
Perform the physical zeroing procedure (see Section 17.5).
REINSTALLING OF THE PHOTOMETER ASSEMBLY