Filter
Top Products
If you do not want to print in manual feed mode, press
Continue. The printer loads the paper as instructed by the
Paper Source setting. (For details on using manual feed mode,
see Chapter 1.)
Mem Overflow
The printer has insufficient memory available for the current
print job. To correct the error, press Continue. If the message
remains, press Reset. You can also clear the error by turning
the printer off and back on again.
If you still receive a Mem Overflow error, it may be necessary
to reduce the number or size of fonts, reduce the number or
size of graphics, lower the resolution, or add more memory to
the printer.
If you add more memory and you still receive a Mem
Overflow message, change the Page Protect setting in the
printer driver; see Chapter 2 for details. (If you are using the
Windows 3.1 EPSONScript driver, change the setting on the
Control Panel as described in Chapter 3.) You can also add
even more memory or print at 300 dpi instead of 600 dpi.
Paper Jam
Paper is jammed in the paper path. Open the printer cover and
clear the jammed paper as described on page 6-8. The jammed
page’s print data is then automatically reprinted.
Paper Out
source size
There is no paper in the indicated paper
source
. Load paper of
the indicated
size
into the printer and press Continue.
6-4
Troubleshooting