Filter
Top Products
PS Menu
The PS menu controls two features available in the default
PostScript emulation mode. You can also set these features
using the Windows 95 printer driver software; see Chapter 2
for details.
Menu item Description
Err Sheet Indicates whether the printer prints an EPSONScript error
message. If the option is off, the message is displayed
on the control panel but not printed.
Protect Level Allows you to increase the amount of memory
allocated for page protection. If the option is off, an
overrun error occurs when the printer doesn’t have
enough memory to print a page. If an error occurs,
raise the level from 1 up to 5. Raising the protect level
decreases printing speed.
ESCP2 and FX Menus
Use the ESCP2 or FX menu only if you have selected one of
these modes as your Emulation mode in SelecType or the
Remote Control Panel utility.
ESCP2 and FX menu items
Menu item Description
Font Selects a font by typeface; Courier is the default (see
the
Technical Information
manual for details on the
available fonts)
Pitch Sets the pitch in cpi (characters per inch) for the
selected Font: 10, 12, or 15 cpi, or Proportional
Condensed Turns condensed printing on or off; 15 cpi pitch
characters cannot be condensed
T.Margin Specifies the margin from the top of the paper to the
base of the first printed line: 0.40 to 1.50 inches; 0.50 inch
is the default
Text * Sets the page length by the number of lines (1 to 81) in
1
⁄
6
-inch increment; 66 lines is the default
3-18
Using the Control Panel