Filter
Top Products
OneTouch Mode Settings
The table below lists the options available for each OneTouch
mode setting. Default settings are shown in bold type.
OneTouch mode setting options
Setting Options Description
Paper Source Auto
MP (built-in tray)
LC1 (lower cassette 1)
LC2 (lower cassette 2)
Selects the tray to load paper
from; Auto loads from the tray
containing paper that
matches the Page Size
setting below
Page Size A4, A5, B5, LT, HLT,
LGL, GLT, GLG, EXE,
F4, MON, C10, DL, C5,
C6, IB5, CTM *
Selects the page size of the
image to be produced
Manual Feed On
Off
Turns manual feed mode on
or off for the built-in paper
tray; see Chapter 1 for
instructions
Orientation Portrait
Landscape
Selects the print direction on
the page
RITech Dark
Medium
Light
Off
Sets the RITech (Resolution
Improvement Technology)
setting for your print job; see
Chapter 5 for details
Copies 1 to 999 Selects the number of copies
to print
MP Tray Size A4, A5, B5, LT, HLT,
LGL, GLT, GLG, EXE,
F4, MON, C10, DL, C5,
C6, IB5, *
Selects the size of paper
loaded in the built-in paper
tray
Toner Save On
Off
Sets the amount of toner
used in your print job; for draft
copies, set to On to use
approximately 50% less toner
for a lighter printout
* See Appendix A for details on paper sizes and specifications.
3-6
Using the Control Panel