Filter
Top Products
Parallel B and Parallel C Menus
These menus control interface options when you use the
Parallel B and/or Parallel C interfaces.
Parallel B and Parallel C menu items
Menu item Description
Speed Selects the transfer speed through the interface channel
based on either the STROBE (Fast) or ACKNLG (Normal)
signal delay period
Bi-D * Enables or disables bidirectional communication across
the interface channel
Buffer Size Sets the memory allocation used for the printer’s parallel
interfaces: Maximum (more for receiving data), Minimum
(more for printing data), or Normal (balanced usage)
* Available only on the Parallel B menu.
Serial Menu
The Serial menu is available only when you have installed the
optional LocalTalk/Serial module or the Serial interface card
(described in Chapter 4) and have set the Emulation menu to
Serial
(see page 3-10). You may need to change these settings to
match the serial settings used by your computer.
Note:
You can also change these settings using the Remote Control Panel
utility as described in the
Technical Information
manual. To match
the computer’s baud rate or set a higher one than that supported by
your computer, see the
Technical Information
manual (this may not
work with some computers).
Using the Control Panel
3-15