Epson EPL-N1200 Printer User Manual


 
Toner Out
You must replace the imaging cartridge as described in
Chapter 5. You can press Continue to print one more page.
Warming Up
The printer is warming up; wait a few moments for it to finish.
Using Hex Dump Mode
Hex dump mode is a special feature that makes it easy for
experienced users to find the cause of communication
problems between the printer and the computer. In hex dump
mode, the printer produces an exact printout of the codes it
receives. Follow these steps to turn on hex dump mode and
send a print job using it:
1. Make sure paper is loaded and the printer is turned off.
2. Hold down the Form Feed button while you turn on the
printer; hold down the button until you see Hex on the
control panel display.
3. Open an application and print a document. Your printer
prints out all the codes it receives in hexadecimal format.
4. To turn off hex dump mode, turn off the printer or reset it by
pressing and holding down the ALT and Continue buttons
at the same time. When Reset All appears on the display,
release the buttons.
Troubleshooting
6-7