Filter
Top Products
The EPL-N1200 control panel consists of a liquid crystal
display, indicator lights, and buttons. The display and lights
keep you informed about the printer’s current status. You can
use the buttons to select settings and functions.
Most of the time you control your printer’s functions using
software. You may, however, need to perform some operations
through the printer’s control panel as described in this chapter.
Note that software settings always override control panel
settings.
Reading the Indicator Lights
The control panel has two sets of indicator lights, as shown on
the illustration above. The lights on the panel’s left side
indicate the current mode. When you choose one of these
modes, you can use the buttons on the control panel to choose
various printer settings, which are defined later in this chapter.
OneTouch mode 1
SelecType mode
OneTouch mode 2
3-2
Using the Control Panel