Filter
Top Products
LJ4 Menu
The LJ4 menu settings control the available fonts and symbol
sets when you use the LJ4 (PCL5e) emulation mode. You
should change the font and symbol sets using your software,
not using SelecType, because your software settings override
SelecType settings.
LJ4 menu items
Menu item Description
FontSource Selects the default font source to Resident, SIMM, or
Download
Font Number Sets the default font number for the selected font
source, 0 through 65535
Pitch Specifies the font pitch if the default font is scalable
and fixed-pitch, from 0.44 to 99.99 cpi (characters
per inch) in 0.01 cpi increments; 10.00 is the default
Height Specifies the font height if the default font is
scalable and proportional, from 4.0 to 999.75 points
in 0.25 point increments
SymSet * Selects the symbol set to be used by the default
font; Roman-8 is the default (see the
Technical
Information
manual for details on the available
symbol sets)
Form Sets the number of lines (5 to 128) for the selected
paper size and orientation, causing new line
spacing settings to be stored in the printer; changes
to the Page Size or Orientation settings in SelecType
may change the Form setting you select; 64 lines is
the default
Source SymSet ** Selects the symbol set number for an optional font
ROM source (from 0 to 3199)
Dest SymSet ** Selects the symbol set number for an optional font
ROM destination (from 0 to 3199)
* If the font selected in the FontSource and Font Number settings is not
available in the SymSet you choose, the FontSource and Font Number
settings return to their default values.
** These menu items are available only when an optional font ROM module is
installed.
Using the Control Panel
3-17