Filter
Top Products
10. Plug the power cord into an electrical outlet; then turn on
the printer.
To verify that the interface is working properly, print a status
sheet and make sure your interface is listed under “Hardware
Configurations.” To do this, wait until the printer warms up
(
Ready
appears on the control panel display and the
On Line
light is on); then press the
Enter
button twice.
Installing an Interface Card
Follow these steps to install an optional EPSON interface card
in your printer:
1. Turn off the printer and unplug the power cable from the
electrical outlet.
w
Warning:
To avoid electrical shock, do not remove the interface slot
cover unless the printer is turned off and unplugged from
the electrical outlet.
2. Remove the two screws securing the interface slot cover;
then remove the cover.
4-8
Installing Options