Filter
Top Products
Paper Set
source size
The paper loaded in the indicated paper
source
does not
match the required paper
size
. Replace the paper with the
correct size paper and press Continue.
Print Overrun
The time required to process data exceeds the print speed due
to an excess of received data. Press Continue to resume
printing. If this message appears again, change the Page
Protect setting in the driver or on the control panel; see
Chapters 2 and 3 for instructions.
Printer Open
The printer cover is open; close it to continue printing.
RAM Check
The printer is checking the RAM; wait a moment for it to finish.
ROM Check
The printer is checking the ROM; wait a moment for it to finish.
Ready
The printer is ready to print.
Reset
The printer’s current interface has been reset and the buffer is
cleared. However, other interfaces may still be active and retain
their settings and data.
Troubleshooting
6-5