Filter
Top Products
1239X Menu
Use the 1239X menu only if you have selected 1239X as your
Emulation mode in SelecType or the Remote Control Panel
utility.
1239X menu items
Menu item Description
Font Selects a font by typeface; Courier is the default (see
the
Technical Information
manual for details on the
available fonts)
Pitch Sets the pitch in cpi (characters per inch) for the
selected Font: 10, 12, 15, 17, 20, or 24 cpi, or Proportional
Code Page Sets the number of the character table you want to use;
437 is the default (see the
Technical Information
manual
for details on the available character tables)
T.Margin Specifies the margin from the top of the paper to the
base of the first printed line: 0.30 to 1.50 inches; 0.40 inch
is the default
Text * Sets the page length by the number of lines (1 to 81) in
1
⁄
6
-inch increments; 67 lines is the default
AutoCR Sets the printer to automatically perform or not perform
a carriage-return then line-feed operation when the
print position exceeds the right margin; On, Off
AutoLF Sets the printer to automatically add or not add
(default) a line-feed after every carriage-return; On, Off
Alt.Graphics Turns the alternate graphics option On or Off
Bit Image Sets the density the printer uses to print bit-mapped
images to either Dark or Light density
ZeroChar Selects either slashed zero (Ø) or unslashed zero (0) to
be printed for the zero character
Character
Set
Selects the number of the character table to use, 2 or 1
(see the
Technical Information
manual for details on the
available character tables)
* If you change the Page Size, Orientation, or T.Margin settings, the Text
setting returns to its default value.
3-20
Using the Control Panel