Filter
Top Products
Setting Options Description
Time-out Various settings from
5 to 300 seconds
(60 sec. default)
Sets the amount of time the
printer waits to receive
data before terminating an
incomplete print job; after
the time-out period,
another print job can print.
Toner Save
Mode
ON
OFF
Sets the amount of toner
used in your print job. If
you’re printing a draft
copy, set to ON to use
around 50% less toner for a
lighter printout.
Low Power
Consumption
ON
OFF
Sets the printer to enter a
power-saving standby
mode if it is not used for 30
minutes. (The printer takes
about 1 minute to warm up
after exiting standby mode.)
Auto Continue ON
OFF
Sets the printer to use Auto
continue mode to continue
printing 5 seconds after
recovering from an print
overrun or insufficient
memory error. It is best to
leave Auto continue OFF so
you are alerted to errors;
then you must press the
Continue button on the
control panel to resume. If
you’ll be away from the
printer and are aware of
possible errors, you can turn
on Auto continue mode.
EPL-N1200 driver settings (continued)
2-14
Printing With the Windows Printer Drivers