Filter
Top Products
Form Feed
The printer is off line and data remains in the printer’s
memory. Press Form Feed to print out the data and clear the
buffer. After printing, Ready appears on the display.
Hex Dump
Hex dump mode is on; see page 6-7 for details.
Illegal AUX I/F Card
The printer cannot recognize the installed optional interface
card. Turn off the printer, then remove the card and reinstall it
as described in Chapter 4. This message could also indicate that
you have installed both the LocalTalk/Serial module (set to use
LocalTalk) and the LocalTalk Type B interface card; if so,
remove one of the interfaces.
Illegal I/F Module
The printer cannot recognize the installed optional
LocalTalk/Serial module. Turn off the printer, then remove the
module and reinstall it as described in Chapter 4.
Image Optimum
The printer cannot print at the requested quality level because
of insufficient memory. The printer reduces the quality
automatically so that it can continue printing. Check to see if
the printout is acceptable. If not, add more memory (for a
permanent solution) or set Resolution to 300 dpi and Page
Protect to OFF (temporarily). See Chapters 2 and 3 for
instructions.
Manual Feed
paper size
Manual feed mode is specified for the current print job. Make
sure the indicated
paper size
is loaded in the built-in paper
tray; then press On Line.
Troubleshooting
6-3