Filter
Top Products
For instructions on installing the printer software for Windows
3.1 or Windows 95, see the Quick Setup Card. For instructions
on installing the Windows NT driver software, see page 2-17.
Then follow the instructions in this chapter to access and use
the Windows printer drivers.
You can use either of the following:
❑
The EPSONScript driver for printing in the PostScript mode
❑
The EPL-N1200 driver for printing in the LJ4 Plus (PCL5e)
emulation
Follow the instructions below to access either driver.
Instructions for using the EPSONScript driver start on page 2-4;
instructions for using the EPL-N1200 driver start on page 2-7.
Accessing the Printer Driver
You can access the printer driver to check or change your print
settings in two ways:
❑
From your Windows application program Print or Print
Setup option
❑
From the Windows 95 Printer Properties utility or the
Windows 3.1 or NT Control Panel.
The way you access the driver determines which programs and
documents the settings will affect. Follow these guidelines:
❑
If you want to change settings for one document only (or
for documents printed with one application only), access
the driver from the application program . The driver
settings return to their defaults after you exit.
2-2
Printing With the Windows Printer Drivers