Filter
Top Products
Printing Menu
All of the SelecType Printing menu settings can be set using
your printer driver software and are overwritten by the
software settings. You can set all of them, except
Resolution
,
using OneTouch modes as described on page 3-5.
Printing menu items
Menu item Description
Paper Source Selects the tray from which to load paper:
Auto (from tray containing paper that matches the
Page Size setting below)
MP (built-in tray)
LC1 (lower cassette 1)
LC2 (lower cassette 2)
Page Size Selects the page size of the image to be produced:
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10,
DL, C5, C6, IB5, CTM **
Orientation Selects the print direction on the page: Portrait or
Landscape
Copies Selects the number of copies to print: 1 to 999
Manual Feed Turns manual feed mode on or off for the built-in
paper tray; see Chapter 1 for instructions
Resolution Sets the print resolution to 600 dpi or 300 dpi
* See Appendix A for details on paper sizes and specifications.
Tray Size Menu
You can use the Tray Size menu to set the size of the paper
loaded in the built-in paper tray (MP tray) or to check the
paper sizes loaded in optional lower paper cassettes.
You can also use OneTouch modes to change the MP Tray Size
setting; see page 3-5.
Using the Control Panel
3-11