Filter
Top Products
Setup Menu
The Setup menu items allow you to customize various printer
modes, select a control panel language, check the total pages
printed to date, and check or reset the toner counter.
Setup menu items
Menu item Description
Interface Sets whether the printer can receive data through
all available interfaces (Auto) or only one of these:
Parallel B, Parallel C, Serial, L/T, AUX
Time Out Sets the amount of time the printer waits to receive
data before terminating an incomplete print job;
after the time-out period, it searches for new data
on another interface channel: Various settings
available between 5 to 300 seconds; default is 60
Standby Turns standby mode on (or off) to reduce power
used by the fixing heater when the printer is not
used for 30 minutes; it warms up in about 60
seconds when a print job is received; default is
Enabled.
Lang Selects the language used for control panel
display messages and the status sheet: English,
French, German, Italian, Spanish, Swedish, Danish,
Dutch, Finnish, Portuguese
Toner Displays the amount of toner left in the imaging
cartridge as follows:
E****F 75 to 100 %
E*** F 50 to 75%
E** F 25 to 50%
E* F 0 to 25%
E F None
For instructions on replacing the imaging cartridge,
see Chapter 5.
Toner Count Clear Resets the toner counter; select this menu item and
press the Enter button after installing a new
imaging cartridge (see Chapter 5 for details)
Page Count Displays the total number of pages printed by the
printer to date
SelecType Init Resets all the SelecType settings to their factory
defaults
3-14
Using the Control Panel