Filter
Top Products
The three indicator lights in the center of the control panel give
you the following information:
Continue
Flashes when the printer detects an error or needs
maintenance. A message appears on the display to
indicate the problem. See Chapter 6 for
information about the messages. After you clear
the problem, press the
Continue
button.
Form Feed
Comes on when the printer receives data. The
light flashes when the printer is processing the
data. If the light stays on, press the
Form Feed
button to print the data and clear the printer’s
memory.
On Line
Indicates that the printer is ready or in Standby
mode. If the light is not on, press the
On Line
button.
Using the Control Panel Buttons
The control panel has two sets of buttons. You use the buttons
in the top row to choose various OneTouch or SelecType
settings, as explained in the following sections. You use the
buttons in the bottom row as described below:
SelecType
ALT
Press this button to choose a OneTouch mode or
the SelecType mode. Press the button once to
choose OneTouch mode 1. Press it again to choose
OneTouch mode 2. Press the button once more to
choose the SelecType mode. See the following
sections for information about these modes.
Using the Control Panel
3-3