Filter
Top Products
Laser precautions
This printer uses laser technology. The following list of
precautions applies whenever you open the printer cover. Even
if you are familiar with other types of printers, be sure to follow
these precautions carefully to ensure safe, efficient operation.
❑
Be careful not to touch the fuser, which is marked
CAUTION HOT SURFACE. If the printer has been in use,
the fuser can be very hot.
❑
Avoid touching the components inside the printer unless
instructed to do so in this
User’s Guide
.
❑
Never force the printer’s components into place; rough
handling can damage the printer.
❑
When you remove the imaging cartridge from the printer,
always set it on a clean, smooth surface. Also, be sure not to
scratch the surface of the drum and avoid touching it, since
oils from your skin can permanently damage its surface
and may affect print quality.
❑
Do not turn the cartridge upside down or stand it on its
side. Do not attempt to modify or take apart the cartridge;
it cannot be refilled.
CAUTION HOT SURFACE
12
Introduction