Filter
Top Products
Tray Size menu items
Menu item Description
MP Tray Size Selects the size of paper loaded in the built-in paper
tray: A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, CTM *
LC1 Displays the size of paper in the indicated lower paper
cassette (same possible settings as MP Tray Size)
LC2
* See Appendix A for details on paper sizes and specifications.
Config Menu
The settings available on the Config menu affect your printer’s
basic operations. Most of the menu items can be set using the
Windows printer driver software and override the SelecType
settings; see Chapter 2 for details.
Config menu items
Menu item Description
RITech * Sets the RITech (Resolution Improvement
Technology) setting for your print job; see Chapter 5
for details: Dark, Medium, Light, Off
Toner Save * Sets the amount of toner used in your print job. If
you’re printing a draft copy, set to On (to use
around 50% less toner for a lighter printout; default is
Off
Density Sets the print density to make your printout darker or
lighter as necessary: 1, 2, 3, 4, 5
Top Offset Makes fine adjustments to the vertical position of
printing on the page, in mm: Up or Down with each
button press
Left Offset Makes fine adjustments to the horizontal position of
printing on the page, in mm: Left or Right with each
button press
Size Ignore Sets to printer to ignore (On) or stop printing (Off) if a
paper size error occurs; if set to On, the image may
be printed outside the edge of the paper and
cause smudging
3-12
Using the Control Panel