Filter
Top Products
The Remote Control Panel utility does not function as
expected.
Software programs override Remote Control Panel settings, so
use your software settings instead of the utility whenever
possible. If your settings have been changed by your software,
reset your printer; see Chapter 3 for details.
Print Quality Problems
This section describes solutions to any problems you may
encounter with the quality of your printout. Many printer
driver settings mentioned here can also be set using SelecType
or the Remote Control Panel utility; if you need to use these
utilities instead of the printer driver, see Chapter 3 or the
Technical Information
manual for details.
The printout has a dark or dirty-looking background.
Lighten the Density setting in the printer driver; see Chapter 2
for details. If you’re using the Windows 3.1 EPSONScript
driver, use the SelecType Config menu to change the density
setting.
Clean the paper path inside the printer with a clean, dry cloth;
see Chapter 5 for instructions.
To clean the internal printer components, try printing three
pages containing only one character per page.
If you still have dark output, there may be a problem with the
imaging cartridge. Remove the cartridge, shake it from side to
side, and then reinstall it. If this does not solve the problem,
replace the imaging cartridge as described in Chapter 5.
6-14
Troubleshooting