Filter
Top Products
Adjusting the RITech Setting
EPSON’s new Resolution Improvement Technology (RITech)
automatically improves the print quality of your lines, text, and
graphics. Most of the time it works behind the scenes to
provide the best printed output. Occasionally, however, you
may need to adjust the RITech setting if you notice a change in
quality, such as after you replace the imaging cartridge.
To determine whether you need to adjust the RITech setting,
print a status sheet using the printer’s control panel. Follow the
steps below:
1. Turn on the printer and let it warm up until you see the
Ready message on the control panel display and the
On Line light comes on. (If it doesn’t come on, press the
On Line button.)
Note:
Before proceeding, make sure
Toner Save Mode
is turned off
or the status sheet will not print. See Chapter 2 for instructions
on changing the setting using the printer driver. You can also
turn it off using the control panel or the Remote Control Panel
utility; see Chapter 3 or the
Technical Information
manual for
more instructions.
Maintenance
5-5