Filter
Top Products
Using OneTouch Modes
The OneTouch modes give you a quick and easy way to change
the most common settings. There are two OneTouch modes,
each with four settings shown on the top two lines of the
control panel. The settings are described in the table on page
3-6.
Follow these steps to change a setting using OneTouch modes:
1. Make sure the printer is turned on and the
On Line
light is on.
2. To change a mode 1 setting, press the
SelecType
button
until the light next to the
Paper Source
setting comes on.
To change a mode 2 setting, press
SelecType
until the light
next to the
RITech
setting comes on.
3. The current values for all four settings appear in the control
panel display above the setting labels. Press the button
beneath the setting you want to change until the value you
want appears in the display. (To move backward through
the options, hold down
Alt
and the button for the setting.)
4. To save your changes and exit the OneTouch mode, press the
On Line
button.
To save your changes and move to the other OneTouch mode,
press the
SelecType
button; then make your changes and
press
On Line
to exit.
mode 1 settings
mode 2 settings
Using the Control Panel
3-5