Filter
Top Products
1. Make sure the
Tear Off/Bin
light is flashing (the paper is at
the current tear-off position). You may need to press the
Tear Off/Bin
button to advance the paper to the tear-off
position.
2. Hold down the
Pause
button for about three seconds.
The
Pause
light begins flashing and the printer enters
the micro adjust mode.
3. Press the
LF/FF
D
button to feed paper backward, or press
the
Load/Eject
U
button to feed paper forward, until
the paper perforation is aligned with the tear-off edge of the
printer cover.
fx3-22-1
tear-off edge of
the printer cover
fx3-22-2
3
R
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
Printing on Continuous Paper
3-39