Filter
Top Products
Installing the tractor in the rear push position
Before installing the tractor in the rear push position, remove it
from its current position. If the tractor is in the front push
position, remove it by pressing the tractor’s lock tabs while
lifting it out. If the tractor is in the pull position, remove it as
described on page 3-28.
1. Make sure the printer is turned off.
2. Lift the paper guide up and off the printer.
3. Lower the tractor into the printer’s mounting slots and press
down both ends of the tractor to make sure that it is firmly
seated.
fx4
G3-12
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-14
Printing on Continuous Paper