Filter
Top Products
1. Make sure the printer is turned off. Then remove the paper guide by
moving it to the upright position and pulling it straight up. Lift the
printer cover by its back edge and then pull it straight up and off the
printer.
2. Holding the cut-sheet feeder in both hands, press down on the latch
levers and fit the notches over the printer’s mounting posts, as shown
below. Release the latch levers to lock the feeder in place. If you are
installing the high-capacity or double-bin cut-sheet feeder, see the
illustration on the next page.
g1-6aa
single-bin cut-sheet feeder
g4-6-1
A
R
Gentian-W Rev.C
A5 size Appendix A
11/14/97 pass 0
Enhancing Your Printer With Options
A-5