Filter
Top Products
8. Slide the right sprocket to remove any slack in the paper, then
lock it in place by pushing the sprocket lock back.
9. Open the edge guides on the paper guide all the way to the
left and right, then raise the continuous paper support.
10. If you are using the front slot, attach the front cover with the
continuous paper positioned as shown below.
11. Turn on the printer.
12. Remove any slack in the paper by pressing the
LF/FF
button.
c
Caution:
Always remove any slack from the paper; otherwise print
quality may be reduced.
fx3-26-1
G3-19-AA
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-26
Printing on Continuous Paper