Filter
Top Products
5. Make sure your paper has a clean, straight edge. Then open
both sprocket covers and fit the first four holes of the paper,
printable side down, over the tractor pins.
6. Close the sprocket covers.
7. Slide the right sprocket to remove any slack in the paper; then
lock it in place by pushing the blue sprocket lock down.
8. Attach the paper guide and lay it flat on the printer. Open the
edge guides all the way to the left and right, then raise the
continuous paper support.
9. Turn on the printer. When the printer receives data, it
automatically loads the paper and starts printing.
G3-14-2
g3-17
3
R
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
Printing on Continuous Paper
3-17