Filter
Top Products
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Removing the printed document from the front push
tractor
To remove the printed document, follow the steps below.
1. Press the
Tear Off/Bin
button to feed the paper’s perforation
to the tear-off edge of the printer cover.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the micro adjust
feature as described in “Adjusting the tear-off position” on page 3-38.
c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form
position.
2. Tear off the printed document using the tear-off edge of the
printer cover.
3. To feed the continuous paper backward out of the printer and
into the standby position, press the
Load/Eject
button.
To remove the remaining paper from the printer, press the
Load/Eject
button to feed the paper backward to the standby
position. Then open the sprocket covers of the tractor and
remove the paper.
c
Caution:
Always tear off your printed document before you press the
Load/Eject
button. Reverse feeding several pages at a time may
cause a paper jam.
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-12
Printing on Continuous Paper