Filter
Top Products
Additional tractor unit (C80020 for FX-880, C80021 for FX-1180)
Use the additional tractor in the pull position
along with your standard tractor installed in
the front or rear push position to improve
paper handling and reduce the chance of
paper jams. This setup is especially useful
with continuous multi-part forms.
For instructions on using this option, see
Chapter 3.
Roll paper holder (#8310)
Allows you to use your printer with 8.5-inch
roll paper like that used with telex machines.
For instructions on using this option, see
page A-20.
Front sheet guide (C81400 for FX-880, C81401 for FX-1180)
Allows you to load single sheets and
carbonless single-sheet multi-part forms of
up to 6 parts.
For instructions on using this option, see
page A-15.
Front paper guide (C81402 for FX-880, C81403 for FX-1180)
Allows you to load single sheets and
carbonless single-sheet multi-part forms of
up to 6 parts. You can use the optional front
paper guide without removing the tractor
from the front push position.
For instructions on using this option, see
page A-15.
Note:
The asterisk ( ) is a substitute for the last digit of the product number, which
varies by country.
A
R
Gentian-W Rev.C
A5 size Appendix A
11/14/97 pass 0
Enhancing Your Printer With Options
A-3