Filter
Top Products
The table below shows the valid data for each barcode type. If invalid data
is included in the barcode data string, the barcode is not printed.
Barcode type Barcode data
EAN-13
EAN-8
UPC-A
UPC-E
Interleaved 2 of 5
POSTNET
Code 39
Code 128
0-9 (Hex 30-39)
0-9 (Hex 30-39)
0-9 (Hex 30-39)
0-9 (Hex 30-39)
0-9 (Hex 30-39)
0-9 (Hex 30-39)
0-9 (Hex 30-39), (Hex 41-5A), (Hex 20, 24, 25, 2B, 2D,
2E, 2F)
Set A, Set B, Set C
The following conditions are required for barcode printing:
Barcode printing is always performed unidirectionally. However,
when it is mixed with raster bit image data, neither barcode nor raster
bit image data is printed.
A barcode is not printed when part of the barcode extends beyond
the right margin.
When barcode data and text data are mixed in a data sequence,
barcodes and text are printed in the same place.
The start and stop (*) characters of Code 39 are added to human
readable characters.
The initial data of Code 128 (Set A, B, or C) is identified as the first
data of Code 128, and must be hexadecimal (41, 42, and 43,
respectively).
When Code 128 Set C and Interleaved 2 of 5 are selected, barcode
data requires an even number data string. However, if an odd
number string is sent, a 0 is automatically added, making it an even
number data string.
The barcode print start position (except for POSTNET) is always
7/72 inch above the baseline.
C
R
Gentian-W Rev.C
A5 size Appendix C
11/14/97 pass 0
Specifications
C-15