Filter
Top Products
6. Remove the front cover by pushing it straight down, as
shown below.
7. Make sure your paper has a clean, straight edge. Then open
both sprocket covers and fit the first four holes of the paper,
printable side up, over the tractor pins.
8. Close the sprocket covers.
9. Slide the right sprocket to remove any slack in the paper; then
lock it in place by pushing the sprocket lock down.
1
2
fx3-9-1
fx3-10-b
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-10
Printing on Continuous Paper