Filter
Top Products
Use the
micro adjust feature
to adjust the top-of-form and
tear-off positions.
The micro adjust feature allows you to move the paper
forward or backward in 1/216-inch increments so that you
can make precise adjustments to the top-of-form and
tear-off positions. For more information, see Chapter 3.
Available Paper Paths
Your printer provides a variety of paper paths for printing on
single sheets and continuous paper. As described below, paper
can be fed into the printer from the top, front, bottom, or rear.
You select the paper path that best suits your current printing
needs.
Printing on continuous paper
You can choose from three tractor positions (front push, rear
push, and pull) and three paper entry slots (front, rear, and
bottom) for continuous paper printing. This section helps you
determine which paper paths and tractor positions are best for
your continuous paper printing needs. See Chapter 3 for tractor
installation and paper loading instructions.
paper release lever
g02-2
R
Gentian-W Rev.C
A5 size Introduction
11/14/97 pass 1
Getting to Know Your Printer
3