Filter
Top Products
Using the Optional Cut-Sheet Feeders
Two types of optional cut-sheet feeders are available for use with your
printer: the single-bin cut-sheet feeder (C80637 /C80369 ) and the
high-capacity cut-sheet feeder (C80638 /C80640 ). You can use either
one of these separately, or you can use both feeders together as a
double-bin cut-sheet feeder to automatically load two different types of
single-sheet paper.
The single-bin cut-sheet feeder holds up to 50 single sheets. The
high-capacity cut-sheet feeder holds up to 150 single sheets or up to
25 envelopes.
c
Caution:
Do not load multi-part forms, carbon paper, or labels in the cut-sheet
feeder.
To install the single-bin, high-capacity, or double-bin cut-sheet feeder, see
the next section. However, before installing the double-bin cut-sheet
feeder, you must assemble it as described on page A-13. To load paper in
a bin, see “Loading paper in the single-bin cut-sheet feeder” on page A-6,
or “Loading paper in the high-capacity cut-sheet feeder” on page A-10.
Note:
You cannot install and use the optional cut-sheet feeders when the tractor
unit is installed in the pull position. To remove the tractor from the pull
position, see page 3-28.
Installing an optional cut-sheet feeder
You install the single-bin, high-capacity, and double-bin cut-sheet feeders
in the same way. Follow the steps on the next page.
Note:
Before you install the double-bin cut-sheet feeder, you need to assemble it as
described on page A-13.
L
Gentian-W Rev.C
A5 size Appendix A
11/14/97 pass 0
A-4
Enhancing Your Printer With Options