Filter
Top Products
1. Tear off the fresh supply of continuous labels at the
perforation nearest the paper entry slot.
2. Hold down the
LF/FF
button to eject the remaining labels from
the printer.
c
Caution:
Never feed labels backward using the
Load/Eject
or
Tear
Off/Bin
button. When fed backward, labels can easily come off the
backing sheet and cause a paper jam.
Using the Tractor in the Front Push Position
Installing the tractor in the front push position
Before installing the tractor in the front push position, remove it
from its current position. If the tractor is in the rear push
position, remove the paper guide and then press the tractor’s
lock tabs while lifting it out. If the tractor is in the pull position,
remove it as described on page 3-28.
Note:
The tractor is installed in the rear push position when the printer is
shipped.
perforation nearest
the paper entry slot
!fx3-19
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-6
Printing on Continuous Paper