Filter
Top Products
The printer does not feed continuous paper to the standby
position.
Cause What to do
You have not torn off the
printed pages before pressing
the Load/Eject button.
Tear off the printed pages at the
perforation. Then press the Load/Eject
button to feed the paper backward to
the standby position.
Wrong top-of-form position
Your printing appears too high or low on the page.
Cause What to do
The paper size setting in your
application software or
printer driver does not match
the size of the paper you are
using.
Check the paper size setting in your
application or printer driver.
The printer’s page length
settings for the front or rear
tractor do not match the size
of the continuous paper you
are using.
Check the page length settings for the
front or rear tractor using the printer’s
default-setting mode or the EPSON
Remote! utility. See “Making Default
Settings” in Chapter 5, or “Using the
EPSON Remote! utility” in Chapter 2.
The top margin or
top-of-form position setting
is incorrect.
Check and adjust the margin or
top-of-form position settings in your
application software. See the printable
area specifications in Appendix C.
You can also adjust the top-of-form
position in micro adjust mode.
However, settings made in Windows
applications override settings made in
micro adjust mode. See “Adjusting the
Top-of-Form Position” in Chapter 3.
7
Troubleshooting
R
Gentian-W Rev.C
A5 size Chapter 7
11/17/97 pass 0
Troubleshooting
7-7