Filter
Top Products
Installing the paper guide
If the paper guide is not installed on your printer, attach it by
inserting the tabs on the paper guide straight down into the
mounting slots on the printer. Then place the paper guide in
the upright position.
Note:
You can use the paper guide only when the tractor is installed in the front
or rear push position. To switch from printing on single sheets using the
paper guide to printing on continuous paper from a tractor, see page 3-33.
When you are not using the paper guide, lay it flat on the
printer to prevent it from obstructing your paper or being
damaged. To lay the paper guide down, lift the paper guide up
slightly, then lower it until it is lying flat on top of the printer.
G4-2
4
Gentian-W Rev.C
A5 size Chapter 4
11/17/97 pass 1
Printing on Single Sheets
4-3