Filter
Top Products
3. Release the left and right sprockets by pulling the blue
sprocket lock levers forward.
4. Slide the left sprocket approximately 12 mm (0.5 inch) from
the far left position and push the blue lever back to lock it in
place. Then slide the right sprocket to match the width of
your paper, but do not lock it. Move the center support
midway between the two sprocket units.
G3-13-2
10
5
0
12 mm (0.5 inch)
The triangle mark on
top of the printer
indicates the point
furthest to the left where
printing can begin.
G3-14-1
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-16
Printing on Continuous Paper