Filter
Top Products
Removing the paper from the pull tractor
To remove continuous paper from the pull tractor, follow the
steps below.
1. After you finish printing, tear off the paper supply at the
perforation nearest the paper entry slot.
2. To feed the paper forward and eject it, hold down the
LF/FF
button.
c
Caution:
Never press the
Load/Eject
or
Tear Off/Bin
button when you
are using the pull tractor; the paper could come off the pull tractor
and jam the printer.
Removing the tractor from the pull position
To remove the tractor from the pull position, follow the steps
below.
1. Remove any paper loaded on the pull tractor as described in
the previous section.
2. Turn off the printer. Then lift the printer cover by its back
edge and then pull it straight up and off the printer.
fx05-1
L
Gentian-W Rev.C
A5 size Chapter 3
11/17/97 pass 1
3-28
Printing on Continuous Paper