Filter
Top Products
Printer Specifications
Mechanical
Printing method: 9-pin impact dot matrix
Printing speed: High speed draft 410 cps at 10 cpi
(455 cps at 12 cpi
maximum)
Draft 310 cps at 10 cpi
Near letter quality 77 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/216-inch
increments
Printable columns: FX-880:
80 columns (at 10 cpi)
FX-1180:
136 columns (at 10 cpi)
Resolution:
Maximum 240 × 144 dpi (near letter quality)
Interfaces: One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode
support and one optional interface slot
Paper feed methods: Friction (front, rear)
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is
required) (front, rear)
Cut-sheet feeder (optional)
Roll paper holder (optional)
L
Gentian-W Rev.C
A5 size Appendix C
11/14/97 pass 0
C-2
Specifications