Filter
Top Products
Selecting a Built-In Font
Your printer comes with the six built-in fonts shown in the
following table. You can select a font using the buttons on the
printer’s control panel as described below.
Note:
Settings you make in application programs usually override settings you
make from the printer’s control panel. For best results, use your
application to select a font and make other settings.
Font Sample
Draft
Draft Condensed
Roman
Roman Condensed
Sans Serif
Sans Serif Condensed
Follow these steps to select a built-in font from the control
panel:
1. Make sure that the printer is not printing. If it is, press the
Pause
button to stop printing.
2. Hold down the
Pause
button for about three seconds. The
Pause
light begins flashing and the printer enters the font
selection mode.
3. Press the
Tear Off/Bin
button until the two Font lights
indicate the font you want as shown on the next page.
L
Gentian-W Rev.C
A5 size Chapter 5
11/14/97 pass 0
5-2
Changing Printer Settings From the Printer’s Control Panel