Filter
Top Products
6-12 Peripherals/Option Installation Rev.A
Confidential
[IRQ]
Set the IRQ. Select the setting value from the combo box to set a new value. The setting value is
from 1 to 15 (Default:10).
[I/O Address]
Set the I/O Address. Select the setting value from the combo box to set a new value. The setting
value is from 0x0000 to 0xFFFF (Default:0x02E8).
[On]
Set the Beep sound during tapping. Check the check box to beep. Remove the check from the
check box not to beep(Default:ON).
[Frequency]
Set the Tab Sound (Beep Sound) frequency. Select the value using Up/Down buton to set a new
value. The frequency is from 37 to 32767Hz (unit:1Hz) (Default:600).
[OK button]
It enables a new setting.
[Cancel button]
It cancels a new setting.
[Apply button]
It is enabled only if the setting value of the Touch Panel Environmental Setting is changed.
[Help button]
It displays a Help Window when this button is clicked.