Filter
Top Products
2-18 OS and Driver Setup Rev.A
Confidential
6. When asked whether another floppy disk should be formatted or not, press the
N
key.
7. When the message that the formatting is over appears, quit the MS-DOS prompt.
❏
Saving the HD image data.
Save all the data in the C:\backup\recovery\data directory in other media or drive.
(Example)
1. Make a network connection to a PC that can write the SR-600 data onto a CD-R.
2. Save all data under the C:\backup\recovery\data directory of the SR-600 to the PC.
3. Write all the data saved in the step 2 above into a CD-R.
4. The data under the C:\backup\recovery directory may be deleted after the data is
saved.
❏
Saving the POS and UniMini data.
As the OPOS and UniMini data are not saved in the image data saved in “Saving the HD
image data”.
Save all data contained in the C:\backup\oposadk and C:\backup\Tmdrv directories in other
media or drive.
Note:
The directories under the [c:\backup] directory are the backup of each driver, which can be backed up
by saving them individually.