Filter
Top Products
Rev.A Peripherals/Option Installation 6-25
Developer's Guide SR-600
Confidential
4. Remove the screw from the both sides of the case (2 screws for both sides, 4 screws in total),
then remove the HDD from the metal case.
5. Set the insulation sheet pre-packed with the system on the metal case.
Note:
Set the both sides of the convex part of the sheet onto the metal case. Set the 1.5x4cm convex part of the
sheet, which prevent the cables etc from damage by setting the edge of the screw under the metal case, to
the bottom.
6. Place the compact flash board on the insulation sheet, then attache the compact flash on the
board. Attach the compact flash board on the metal case with a supplied screw.
CAUTION:
Be sure to set the insulation sheet to prevent the cable from the damage.
7. Follow this procedure backward. Set the CompactFlash Slot on the CD-ROM Drive amd
attach the main cover.
Installation is completed.