Epson SR-600 Cash Register User Manual


 
3-14 BIOS Setup Rev.A
Confidential
Hard Disk(s) fail (80) HDD reset failed
Hard Disk(s) fail (40) HDD controller diagnostics failed.
Hard Disk(s) fail (20) HDD initialization error.
Hard Disk(s) fail (10) Unable to recalibrate fixed disk.
Hard Disk(s) fail (08) Sector Verify failed.
Keyboard is locked out - Unlock
the key.
BIOS detect the keyboard is locked.
Keyboard error or no keyboard
present.
Cannot initialize the keyboard.
Make sure the keyboard is attached correctly and no keys are being pressed
during the boot.
Manufacturing POST loop. System will repeat POST procedure infinitely while the keyboard controller is
pull low.
This is also used for M/B burn in test.
BIOS ROM checksum error - System
halted.
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail. BIOS reports the memory test fail if the onboard memory is tested error.
Table 3-8 POST Messages (Continued)
Message Description