Filter
Top Products
Rev.A Peripherals/Option Installation 6-41
Developer's Guide SR-600
Confidential
• MSR Start/End Sentinels(Card Start, Card End, ISO/JIS1 Track1 Start, ...., JIS2Start,
JIS2End)
Set the character to be added at the front and end of data during loading. It ispossible to
specify this setting for each card and each track. Leave this field blank if no character is
to be added. The unique characters can be set ussing the code below:
Carriage return ’\R’ or ’\r'
Tab ’\T’ or '\t'
’\' ’\\'
Others '\xx’ xx represents 2 digits hexadecimals. Directory specifing the
character codes in hexadecimals.
MSR Firmware Update Tool
Description
This tool is for overwriting Ver.3.00 and higher releases of the DM-MS series Keyboard
firmware. The older release of the firmware overwriting tool (PKUPDT.EXE) is to be used for
overwriting Ver.2.XX and previous firmware.
Commands
The commands are executed in the formats shown below.
PKUPDT2.EXE [binary-file [/F] ] [/I] (firmware overwriting)
PKUPDT2.EXE /Ddata-file |/Udata-file (setup data transmission)
Parameter descriptions
binary-file: The binary file for firmware overwriting purposesns
/F: Does not check the version during firmware overwriting
/I: Initializes the setup datasion durin
/Ddata-file: Transmits the contents of the data set-up file specified with 'data-file'
to the irm ware
/Ufata-file: Uploads the setup data contained in the firmware and writes it into
the data-file
No parameter: Displays the current version
Processing details
It is not possible to specify the reading (upload) and writing (download) of setting data at the
same time as overwriting the firmware owing to the fact that the setting data is not initialized
with the defaults.