Filter
Top Products
Configuration Page Illustration and Key
Configuration Page Example
The default S/N is
AAXXYY99999. To set
the correct S/N, refer to the
SERVICE MODE procedure
in Chapter 3 of this manual.
The three most recent
error log messages
display here.
All the paper handling
devices that are
physically present
should be listed in this
section. Verify that
each device is
connected according
to Figure 7- 7 .
When configured
correctly:
Device 1=2000 Sheet
Input Tray
Device 2=Mailbox
Device 3=Stapler
Figure 7-5
Formatter and firmware’s
datecode and version
number.
The MIO Block shows
network communication.
See Figure 7-9.
Formatter Number: Division
use only. No functionality or
accessibility.
Check the Total
Memory to see
if it corresponds
with what is
physically
installed in the
printer.
7-12 Troubleshooting