Filter
Top Products
Connecting to the MIDDLE of a LocalTalk
Network
Connecting to the MIDDLE of a LocalTalk Network (1 of 2)
1 Disconnect the printer from its power source. Insert the new connector box
cable into the LocalTalk port of the printer.
2 Insert one end of the new cable into the connector box.
3 Place the other end of the new cable next to a connector box on the network.
4 Unplug one cable from the connector box on the network.
Connecting to the MIDDLE of a LocalTalk Network (2 of 2)
5 Insert the new cable into the connector box on the network.
6 Insert the cable you removed from the network into the new connector box.
Then, reconnect the printer to its power source.
Figure B-3
Figure B-4
B-4 I/O Information