Filter
Top Products
STD
PAPER
HEAVY
PAPER1
HEAVY
PAPER2
CARD
STOCK1
CARD
STOCK2
CARD
STOCK3
Typical copy/bond paper,
labels, envelopes, and
transparencies.
Supports 20-28 lb Bond
media.
Heavier copy/bond paper,
labels.
Supports 28-36 lb Bond
media.
Heavier copy/bond paper,
labels.
Supports 36-42 lb Bond
media.
Cardstock, heavy paper.
Minimum media weight
supported is 90 lb Index
43 lb Bond.
Cardstock heavy paper.
Minimum media weight
supported is 90 lb Index
43 lb Bond.
Cardstock heavy paper.
Minimum media weight
supported is 90 lb Index
43 lb Bond.
Note
Any preprinted media, labels or envelopes must have inks, coatings or
adhesives that withstand temeratures up to 215° C. Refer to the HP
LaserJet Printer Family Paper Specification Guide for more complete media
specifications.
Setting the Fuser Mode Using PJL Command
The printer default can be set using the following command:
<ESC>%-12345X@PJL<CR><LF>
@PJLDEFAULTFUSER=STDPAPER<CR><LF>
<ESC>%-12345X<CR><LF>
The range choices are as follows:
STDPAPER
HEAVYPAPER1
HEAVYPAPER2
CARDSTOCK1
CARDSTOCK2
CARDSTOCK3
Table 3-4
Initial Fuser Mode Recommendation
3
Operating
Overview
Operating Overview 3-9