Filter
Top Products
Connecting to LocalTalk Networks
The printer does not come with a LocalTalk network cable. Use a standard
LocalTalk network cable and connector kit, such as the HP LocalTalk
Network Cable Kit, part number 92215N. You will need one connector kit
for each printer on the network, and another for each Macintosh computer
on the network.
Connecting to the END of a LocalTalk Network
Connecting to the END of a LocalTalk Network
1 Disconnect the printer from its power source. Insert the connector box cable
into the LocalTalk port of the printer.
2 Insert one end of the cable into the new connector box.
3 If the connector box is not self-terminating, insert a terminating resistor
into the connector box.
4 Insert the other end of the cable into the last connector box on the network.
(Remove the terminating resistor if necessary.)
5 Reconnect the printer to its power source.
Figure B-2
B
I/O Information
I/O Information B-3