Filter
Top Products
1 Printer Information lists printer specific statistics.
Serial Number shows the printer serial number.
Formatter Number shows the number of the formatter board.
Firmware Datecode is an eight-digit date (YYYYMMDD) of the internal code.
Processor Revision is the revision number of the firmware processor.
Page Count shows the number of pages the printer has printed.
Pages Since Last Power Cycle shows the number of pages the printer has printed since the
last time it was turned off.
Pages Since Last Maintenance shows the number of pages the printer has printed since a
maintenance kit was installed.
2Installed Personalities and Options lists printer languages and all accessories that are
installed.
Note: HP LaserJet 5Si HM will show 1 Meg ROM when Thermal Control PCA is installed. The
PostScript key SIMM uses the same identifier.
3 Error Log shows the number of errors currently in the error log and the last three errors that
occurred.
4 Memory shows the total amount of installed memory, and indicates the amount of available
memory for PCL applications (such as font downloading software). Information about the
current I/O Buffering and Resource Saving configuration appears here. If the printer does not
have enough memory installed to enable these two features, the amount of additional memory
needed appears.
5 Security lists whether the control panel is locked, whether the control panel has a security
password, and if the Printer Hard Disk (optional in 5Si/5Si MX) has been write-protected.
6 Paper Handling Options lists the installed paper handling accessories. These accessories
may include the Duplex Unit, Envelope Feeder, 2000-Sheet Input Tray, Multi-Bin Mailbox, or
Mailbox with Stapler.
Table 3-16 Key to Figure 3-2
3
Operating
Overview
Operating Overview 3-27